Use:

This machine is suitable for impact test of children's bicycle frame/front fork assembly.

Principle:

Drop test: Fix the rear axle, place a weight on the saddle, lift the front fork to drop it freely onto the steel anvil, and check for deformation or other forms of damage to the frame.

According to the standard:

This tester is made according to GB 14746 and other standards.

Specification parameters:

* Test station :1 station

* Sample: Bicycle frame/front fork assembly

* Saddle tube loading load :30kg cumulative

* Saddle weight center of gravity: 75mm above the top surface of the riser

* Roller: Outer diameter Φ150mm,R200mm

* Count :0~999 999 times can be set

* Controller :PLC+ touch screen control

* Air source :7kgf/cm^2

* Volume (WxDxH):165x70x130cm

* Weight (approx.) :≈175Kg

* Power supply :1 # AC 220V 50Hz 3A