Product Description:
This hardness tester is used to measure the hardness of ordinary rubber/soft plastics
■ Peak holding function
By using the peak hold function, the maximum value can be easily read. Especially when stress relaxation occurs (indicating a decrease in value after compression), the hardness of the specimen can be accurately measured.
■ Timer hold function
By using the timer hold function, the measurement value can be maintained at any time between 1 and 15 seconds.
Peak holding value and timer holding value can be obtained simultaneously through one measurement.
*Compliant with standards: JIS K 6253-3, JIS K 7215, ISO 48-4, ASTM D 2240
*Measurement mode:
1. Peak hold mode (maximum value reading measurement)
2. Timer hold mode (can be set between 1-15 seconds per second)
3. Normal mode (normal measurement)
*External output: USB connection/RS-232C connection ※ Optional
*Power supply: AC adapter (100-240V)
*Weight g: Approximately 300

*Pressure surface size mm: φ 18
*Dimensions mm: Approximately 73 in width, 28.5 in depth, and 117.5 in height
*Measurement mode:
1. Peak hold mode (maximum value reading measurement)
2. Timer hold mode (can be set between 1-15 seconds per second)
3. Normal mode (normal measurement)
*External output: USB connection/RS-232C connection ※ Optional
*Power supply: AC adapter (100-240V)
*Weight g: Approximately 300
*Usage: Ordinary rubber